New Product Non Stop Rewind Die Cutting Machine with Slitter

The maximum speed of this machine: 220 meters/minute, using Inovance control system (7 servo + motion controller), equipped with circular die cutting, slitting, automatic feeding,Automatic paper tube casing, automatic flying knife, automatic labeling, paper tube without glue, no creases, waste scraping, counting, meter recording and other functions.

1: Performance characteristics

A. Cutting speed 220 meters/minute

B. Cutting accuracy ±0.1

C. Maximum paper width 350mm

D. The maximum unwinding diameter is 800mmE. The maximum diameter of rewinding is 140mmF. The weight of the whole machine is 1500kgG. Voltage 380vH. Total power 9kwI. Packing size: 2300mm (length) x1200mm (width) x3000mm (height)

2: Discharging part

A. Air-expanding shaft for discharging material (3 inches per piece)

B. Automatic constant tension

C. Automatic feeding

D. Automatic correction

3: Die cutting part

A. Servo motor

B. Die-cut bottom roller (direct 145mm)

C. Bearing (NSK)A. Left and right sliders

D. Adjustment hand wheel

E. Pressure adjustment frame assembly

4: Waste discharge part

A. Scrap scraping roller

B. Waste conveyor belt

C. scraper

D. Servo motor

E. Planetary reducer

5: Cutting part

A. Upper knife (8)

B. Lower the knife (8)

C. Left and right adjustment hand wheel

D. Counting photoelectricity

E. Vacuum waste

F. Paper pulling roller (servo)

6: Receiving part

A. Automatic rotating rewinding assembly (servo)

B. Air-expanding shafts for receiving materials (2 for 1 inch, 2 for 1.5 inches)

C. Automatic inflation

D. Glueless paper pressing assembly

E. Automatic flying knife device

F. Automatic label spitting (servo)

G. Automatic labeling device

H. Paper tube vibration plate

I. Automatic paper picking tube device

J. Automatic paper tube casing device

K. Automatic blankingL. Cylinder

7: Electronic control part

A. Servo motors (7 pcs., Inovance)

B. Motion controller (Inovance)

C. Simulation correction (editor)

D. Touch screen (10 inches Inovance)

E. Counting photoelectric (SK, Germany)

F. Cylinder (Taiwan Airtac)G. Proximity switch (Schneider, France)

H. Relay (China Chint)I. Button (France Schneider)

J. AC contactor (China Chint)

K. Circuit control line assembly